ASROCK 890FX DELUXE5 User Manual page 32

Serial port Header
(9-pin COM1)
(see p.12 No.30)
HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(see p.12 No. 45)
Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide
Step 1
Prepare the bundled Front USB 3.0 Panel,
four HDD screws, and six chassis screws.
Step 3
Intall the Front USB 3.0 Panel into the 2.5"
drive bay of the chassis.
Step 5
Plug the Front USB 3.0 cable into the USB 3.0
header (USB3_1_2) on the motherboard.
This COM1 header supports a
RRXD1
DDTR#1
DDSR#1
serial port module.
CCTS#1
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
HDMI_SPDIF header, providing
SPDIF audio output to HDMI VGA
1
GND
card, allows the system to
SPDIFOUT
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Screw the 2.5" HDD/SSD to the Front
Step 2
USB 3.0 Panel with four HDD screws.
Screw the Front USB 3.0 Panel to the
Step 4
drive bay with six chassis screws.
Step 6
3 2 3 2 3 2 3 2 3 2
The Front USB 3.0 Panel is ready
to use.