Storage Configuration - ASROCK 890FX DELUXE3 User Manual

3.4.4

3.4.4 Storage Configuration

3.4.4 3.4.4 3.4.4 Storage Configuration Storage Configuration Storage Configuration Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
Onboard SATA Controller [Enabled]
SATA Operation Mode [IDE]
SATA IDE Combined Mode [Enabled]
Marvell SATA3 Controller [Enabled]
Marvell SATA3 Operation Mode [IDE]
[Enabled]
Onboard IDE/1394 Controller
SATA3_1 [Hard Disk]
SATA3_2 [Not Detected]
SATA3_3 [Not Detected]
[Not Detected]
SATA3_4
SATA3_5 [Not Detected]
SATA3_6 [Not Detected]
SATA3_7 [Not Detected]
SATA3_8 [Not Detected]
IDE1 Master [Not Detected]
IDE1 Slave [Not Detected]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard SATA Controller
This item is for SATA3_1 to SATA3_6 ports. Use this item to enable or
disable the "Onboard SATA Controller" feature.
SATA Operation Mode
This item is for SATA3_1 to SATA3_6 ports. Use this item to adjust SATA
Operation Mode. The default value of this option is [IDE]. Configuration
options: [AHCI], [RAID] and [IDE].
If you set this item to RAID mode, it is suggested to install
SATA ODD driver on SATA3_5 or SATA3_6 port.
SATA IDE Combined Mode
This item is for SATA3_5 and SATA3_6 ports. Use this item to enable or
disable SATA IDE combined mode. The default value is [Enabled].
Marvell SATA3 Controller
This item is for Marvell SATA3_7 and SATA3_8/eSATA ports. Use this item
to enable or disable the "Marvell SATA3 Controller" feature.
Marvell SATA3 Operation Mode
This item is for Marvell SATA3_7 and SATA3_8/eSATA ports. Use this item
to adjust Marvell SATA3 Operation Mode. The default value of this option is
[IDE]. Configuration options: [AHCI] and [IDE].
Onboard IDE/1394 Controller
Use this item to enable or disable the "Onboard IDE/1394 Controller" feature.
Configure onboard
serial ATA
controller.
Select Screen Select Screen
Select Item
Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 7 5 7 5 7 5 7 5 7