ASROCK 770 EXTREME3 Installation Manual page 16

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB10_11)
(see p.2 No. 23)
(9-pin USB8_9)
(see p.2 No. 21)
(9-pin USB6_7)
(see p.2 No. 22)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 26)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.2 No. 30)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.2, No. 29)
1 6 1 6 1 6
1 6 1 6
ASRock
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
Besides five default USB 2.0
ports on the I/O panel, there are
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
This connector allows you
to receive stereo audio input
CD1
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
convenient connection and
control of audio devices.
770 Extreme3 Motherboard