Cpu Configuration - ASROCK 4COREN73PV-HD720P - V1.0 V3.0 User Manual

BIOS SETUP UTILITY
H/W Monitor
Main Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.

CPU Configuration

Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
3 . 3 . 1 3 . 3 . 1 CPU Configuration CPU Configuration
3 . 3 . 1 3 . 3 . 1 CPU Configuration 3 . 3 . 1 CPU Configuration CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
[Auto]
CPU Frequency (MHz) [333]
[Enabled]
Boot Failure Guard
[Disabled]
CPU Spread Spectrum
[Disabled]
PCIE Spread Spectrum
[Disabled]
SATAII Spread Spectrum
Ratio Actual Value 7.5
[Disabled]
Enhanced Halt State
[Disabled]
Max CPUID Value Limit
[Enabled]
Intel Virtualization tech.
[Enabled]
CPU Thermal Throttling
[Disabled]
No-Excute Memory Protection
[Enabled]
Hyper Threading Technology
[Disabled]
Intel (R) SpeedStep (tm) tech.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configuration
options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU Spread Spectrum
This feature will be set to [Disabled] as default. Configuration options:
[Disabled] and [Auto].
Boot Security Exit
Configure CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select the over clock
mode.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
3 9 3 9 3 9
3 9 3 9