ASROCK 4COREN73PV-HD720P R1.0 Installation Manual page 6

STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows ®
After step1, 2, 3, you can start to install Windows
system. At the beginning of Windows
driver. When prompted, insert the SATA / SATAII driver diskette containing the NVIDIA
RAID driver. After reading the floppy disk, the drivers will be presented. Select the drivers
to install. The drivers are as below:
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
Please select A and B for Windows
drivers needed for RAID mode, you have to select them separately. Please specify the
first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
(create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs, you still
need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please set the
RAID configuration by using the Windows RAID installation guide part of the
document in the following path in the Support CD:
.. \ RAID Installation Guide
XP / XP 64-bit OS on your system.
®
XP / Windows
®
setup, press F6 to install a third-party RAID
® XP / XP 64-bit in RAID mode. (There are two RAID
® XP / Windows ® XP 64-bit on IDE HDDs and want to manage
6 6 6 6 6
®
XP 64-bit OS on your
®