Chipset Configuration - ASROCK 4COREN73PV-HD720P - V3.1 User Manual

savings. The default value is [Auto]. Configuration options: [Auto], [Enabled]
and [Disabled]. If you install Windows
the "Power Schemes" as "Portable/Laptop" to enable this function. If you
install Windows Vista
® TM
to [Enabled]. This item will be hidden if the current CPU does not support Intel
(R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
3.3.2 3.3.2

Chipset Configuration

Chipset Configuration
3.3.2 Chipset Configuration 3.3.2 3.3.2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
DRAM Frequency
Flexibility Option
Memory Timings
OnBoard GPU Clock
Share Memory
Primary Graphics Adapter
Onboard LAN
OnBoard HD Audio
Front Panel
DRAM Voltage
VTT Voltage
VDDQ Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [266MHz (DDRII533)], [333MHz
(DDRII667)] and [400MHz (DDRII800)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Memory Timings
Use this to adjust values for memory timings. Configuration options: [Auto]
and [Manual]. The default value is [Auto].
OnBoard GPU Clock
Use this option to adjust onboard GPU clock. Configuration options: [Auto]
and [Manual]. The default value is [Auto].
Share Memory
This allows you to set share memory feature. The default value is [Auto].
Configuration options: [Auto], [32MB], [64MB], [128MB] and [256MB].
XP and select [Auto], you need to set
®
and want to enable this function, please set this item
Options
[Auto]
Auto
[Disabled]
266MHz (DDRII533)
333MHz (DDRII667)
[Auto]
400MHz (DDRII800)
Manual
[Auto]
[Auto]
[PCI]
Select Screen
Select Item
[Enabled]
+ - Change Option
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
F10 Save and Exit
[Auto]
ESC Exit
[Auto]
[Auto]
4 1 4 1 4 1
4 1 4 1