Tm Tm - ASROCK 4CORE1600P35-WIFI - V1.0 User Manual

2.19.2 2.19.2 2.19.2 Installing Windows Installing Windows Installing Windows
2.19.2 2.19.2 Installing Windows Installing Windows
W W W W Without RAID F ithout RAID F ithout RAID Functions ithout RAID F ithout RAID F
If you want to install Windows
HDDs without RAID functions, please follow below steps.
If you set at AHCI mode and install Windows
HDD, you will see below message when you install the AHCI driver from our
support CD,
"The computer currently contains version 8.3.0.1008 of solfware
which is newer than the version you are about to install. Are you
sure you want to overwrite the current software with the older
version 7.5.1.1017?"
It is recommended to install this driver for better SATA / SATAII HDD
compatibility.
Using SATA / SATAII HDDs and eSATAII devices with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
®
STEP 2: Install Windows
Insert the Windows Vista
® TM
your system, and follow the instruction to install Windows
on your system. When you see "Where do you want to install Windows?" page, please
insert the ASRock Support CD into your optical drive, and click the "Load Driver" button
on the left on the bottom to load the Intel
following path in our Support CD:
.. \ I386 (For Windows Vista
®
.. \ AMD64 (For Windows
®
After that, please insert Windows
drive again to continue the installation.
Using SATA / SATAII HDDs and eSATAII devices without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows ®
Vista Vista Vista / Vista / Vista / Vista
Vista Vista / Vista / Vista
TM TM TM TM TM
®
unctions unctions unctions unctions
Vista / Vista 64-bit OS on your SATA / SATAII
® TM TM
Vista
®
Advanced screen
TM TM
Vista / Vista 64-bit OS on your system.
/ Vista 64-bit optical disk into the optical drive to boot
TM
AHCI drivers. Intel
®
OS)
TM
Vista 64-bit OS)
TM
Vista / Vista 64-bit optical disk into the optical
® TM TM
Advanced screen
Vista TM / Vista TM 64-bit OS on your system.
5 0 5 0 5 0
5 0 5 0
64-bit 64-bit 64-bit
64-bit 64-bit
TM TM TM TM TM
/ Vista 64-bit OS on IDE
TM TM
IDE Configuration.
Vista / Vista 64-bit OS
® TM TM
AHCI drivers are in the
®
IDE Configuration.