Chipset Configuration - ASROCK 4CORE1600-D800 - V1.0 User Manual

savings. The default value is [Auto]. Configuration options: [Auto], [Enabled]
and [Disabled]. If you install Windows
the "Power Schemes" as "Portable/Laptop" to enable this function. If you
install Windows Vista
® TM
to [Enabled]. This item will be hidden if the current CPU does not support Intel
(R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
3.3.2 3.3.2

Chipset Configuration

Chipset Configuration
3.3.2 3.3.2 Chipset Configuration 3.3.2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
Memory Remap Feature
DRAM Frequency
Flexibility Option
DRAM CAS# Latency
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
DRAM RAS# Activate to Precha
Primary Graphics Adapter
Internal Graphics Mode Select
DVMT Mode Select
DVMT/FIXED Memory
OnBoard HD Audio
Front Panel
OnBoard Lan
DRAM Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [333MHz (DDRII667)], [400MHz
(DDRII800)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options are [6], [5], [4], [3] and [Auto].
DRAM RAS# to CAS# Delay
This controls the latency between the DRAM active command and the
read / write command. Configuration options: [Auto], [3 DRAM Clocks], [4
DRAM Clocks], [5 DRAM Clocks] and [6 DRAM Clocks].
XP and select [Auto], you need to set
®
and want to enable this function, please set this item
ENABLE: Allow
[Disabled]
remapping of
[Auto]
overlapped PCI memory
[Disabled]
above the total
[Auto]
physical memory.
[Auto]
[Auto]
DISABLE: Do not allow
[Auto]
remapping of memory.
[PCI]
[Auto]
Select Screen
[DVMT Mode]
Select Item
[256MB]
+ - Change Option
F1 General Help
[Auto]
F9 Load Defaults
[Auto]
F10 Save and Exit
[Enabled]
ESC Exit
[Auto]
2 9 2 9 2 9
2 9 2 9