Advertisement
CX-One
Ordering information
CX-One FULL
Single licence
Three user licence
Ten user licence
Thirty user licence
Fifty user licence
Site licence
Software on CDs
Software on a DVD
CX-One LITE
Single user licence
Software on CD
Specifications
Subject
Indicator
Programming
CX-Programmer
CX-Simulator
CX-Designer
Networks
CX-Integrator
CX-ConfiguratorFDT
Motion & Drives
CX-Motion
CX-Drive
CX-Postion
Regulation and Switchting
CX-ThermoTools
CX-Process
Sensing
CX-Sensor
Integrated "One software" that covers all
your requirements for complete machine
automation
This single programming and configuration environment is an integrated software
management tool called CX-One that enables the user to build, configure and program
networks, PLCs, HMIs, motion control systems, drives, temperature controllers and
sensors. The result of a single software is to reduce complexity of the configuration
and allow automation systems to be programmed or configured with minimal training.
By registering a licence number at www.omron-industrial.com, users can benefit
from free upgrades to their version of CX-One. An automatic update service can notify
users as soon as relevant patches are available.
CX-One is available as as two types. FULL supporting all PLCs or LITE designed for
our compact PLC range. Thus our integrated "One Software" applies to our complete
portfolio.
Description
CX-Programmer provides one common PLC software platform for all types of Omron PLC controllers – from micro PLC's up to
Duplex processor systems. It allows easy conversion and re-use of PLC code between different PLC types, and the full re-use of
control programs created by older generation PLC programming software.
A debugging environment equivalent to the actual PLC system environment can be achieved by simulating the operation of a
CS/CJ Series PLC with a virtual PLC in the computer. CX-Simulator makes it possible to evaluate program operation, check the cycle
time and reduce debugging time before the actual equipment is assembled.
CX-Designer is used to create screen data for NS-series Programmable Terminals. CX-Designer can also check the operation of the
created screen data on the computer. CX-Designer enables efficient development process for screen creation, simulation and project
deployment. Users can develop screens more efficiently with Easy-to-use Support Software. CX-Designer has about 1,000 standard
functional objects with associated graphics and advanced functions, so even first-time users can create screens easily just by
arranging functional objects in a screen.
CX-Integrator is the main configuration software for CX-One. It enables easy performance of many operations, such as monitoring
the connection status of various networks, setting parameters, and diagnosing networks.
Based on FDT/DTM technology, CX-ConfiguratorFDT can be used to configure devices from any vendor connected to a PROFIBUS
network. This concept will later be expanded to support many more networks using this technology.
CX-Motion can be used to create, edit, and print the various parameters, position data, and motion control programs (G code)
required to operate Motion Controllers, transfer the data to the Motion Control units, and monitor operation of the Motion Control
units. Increase productivity in every step of the motion control process, from development of the motion control program to system
operation.
The complete current range of Omron Yaskawa inverters and servos is covered in this software with full access to all parameters
(with 3 different operator levels available). An easy overview of parameters is also included which includes filters to show values
that are: different from default, different from inverter, invalid setting. Graphical overviews are available to further assist with
configuration of some more detailed parameters such as jump frequencies, v/f profiles and analog setting.
CX-Position simplifies every aspect of position control, from creating/editing the data used in Position Control units (NC units)
to communicating online and monitoring operation. The software is equipped with functions that can improve productivity, such as
automatically generating project data and reusing existing data.
CX-ThermoTools is a configuration and monitoring product for E5CN and E5ZN-series Temperature Controllers. It provides easy
setup, online data logging, and real-time monitoring. Users can easily create, edit, and batch-download parameters from a personal
computer, reducing the work required to set parameters. It is possible to monitor data for up to 31 Temperature Controllers at the
same time.
CX-Process simplifies every aspect of loop control, from creating/transferring function blocks to running the Boards/units and
debugging (tuning PID parameters, etc.) operation. Function block programs can be created easily by pasting function blocks in the
window and making software connections with the mouse.
CX-Sensor allows configuration and monitoring of Omron's ZX range of sensors via a series of easy to use displays. The graphing
dialog allows the outputs from several sensors to be reviewed and compared simultaneously, allowing configuration of complex
processes. The software also includes a driver that allows sensor data to be accessed via an Omron serial control unit (SCU) and
from other Omron applications such as CX-Supervisor. With the aid of Omron's CX-Server OPC application it is even possible to
monitor sensor data in real time from Microsoft Excel.
Software
Media
Order code
Licence Only
CXONE-AL01-EV_
Licence Only
CXONE-AL03-EV_
Licence Only
CXONE-AL010-EV_
Licence Only
CXONE-AL030-EV_
Licence Only
CXONE-AL050-EV_
Licence Only
CXONE-AL0XX-EV_
CD
CXONE-CD-EV_
DVD
CXONE-DVD-EV_
Media
Order code
Licence Only
CXONE-LT01-EV_
CD
CXONE-LTCD-EV_
521
Advertisement
