Editing Overlapping Objects; Method For Selecting Specified Objects - Omron NS-CXDC1-V3 - REV 10-2010 User Manual

Editing Overlapping Objects

Note
4-6

Editing Overlapping Objects

4-6-1

Method for Selecting Specified Objects

2. Select the destination cell and paste the copied setting. Copied settings
can be pasted to more than one cell, enabling global replacement of set-
tings.
(1) If an object is selected on the screen, only the properties for the selected
functional object are listed.
(2) The properties of the following functional objects can be set using the list
edit function.
• ON/OFF Buttons
• Word Buttons
• Command Buttons
• Bit Lamps
• Word Lamps
• Text
• Numeral Display & Input
• String Display & Input
• Thumbwheel Switches
• Dates
• Time
• Temporary Inputs
• Consecutive Line Drawing
• Multifunction
The CX-Designer has an Object List Function, which lists objects on the
screen.
Specify objects in the Object List Window to have that object selected.
This enables objects hidden under other objects to be selected and for the
settings for these objects to be checked and changed on the Property List.
Bit lamp properties can be
checked and changed on
the Property List.
Select a bit lamp in the
Object List Window.
The bit lamp hidden
behind other objects
will be selected.
Section 4-6
53