Omron M12 Datasheet page 21

New Product
Connector Terminal Boxes
XW3D
Simple Wiring of Sensor Actuators
• Greatly reduce wiring in combination with the Smartclick
XS5.
• Insert the connector and turn 1/8 of a turn to lock the
connectors.
• Higher rated current to enable output applications.
• Use previous M12 screw connectors.
Specifications
Rated current
Rated voltage
Contact resistance
(connector)
Insulation resistance
Dielectric strength
(connector)
Degree of protection
Insertion tolerance
Lock strength
Cable holding strength
Lock operating force
Ambient temperature
range
Connection Combinations
OMRON model no.
Connector Terminal Box XW3D
is a registered trademark of the OMRON Corporation.
22
4 A/port, 12 A/Box (power line)
10 to 30 VDC
40 mΩ max.
(20 mV max., 100 mA max.)
1,000 MΩ min. (at 500 VDC)
500 VAC for 1 min
(leakage current: 1 mA max.)
IP67 (IEC60529)
50 times min.
Pulling: 100 N/15 s, Twisting: 1 N·m/15 s
100 N/15 s
0.1 N·m to 0.25 N·m
Operating: −25 to 70°C
Twist-and-Click
Plug Connectors
XS5H, XS5G,
XS5W (plug end),
XS5R (plug end)
Materials and Finish
Item Materials/finish
Contacts Brass/nickel base, 0.4-µm gold-plating
Fixtures Nickel-plated zinc alloy
Case PBT resin (UL94V-O), light gray
Bushing Rubber
O-ring Rubber
PCB Glass epoxy board
Sealing resin Urethane resin (UL94V-0)
UL AWM2464
Cable Signal lines: AWG22
Power and ground lines: AWG18
M12 Plug Connec-
tors
XS2H, XS2G,
XS2W (plug end),
XS2R (plug end)
❍
: Connected by
❍: Connected by screwing.
.