Measuring Objects - Omron F400 - INTRODUCTION Introduction Manual
Color vision sensor
Hide thumbs
Also See for F400 - INTRODUCTION:
- Setup manual (39 pages) ,
- Datasheet (10 pages) ,
- Operation manual (156 pages)
Table of Contents
Advertisement
2-2-5 Measuring Objects
Input measurement trigger and the measurement will be performed according
to the conditions set for the current scene.
The results will be output to OR terminal of the terminal block.
1
Press the ESCape key in following screen to leave
"SET" mode.
2
Select "MONitor" to enter "RUN" mode and press the
ENTer key.
3
Select "RUN" and press the ENTer key.
The screen enters measurement mode.
Press the TRIGger key.
4
One measurement will be performed.
Select "RUN" mode.
21
Advertisement
Table of Contents
