Notes On Cds - Aiwa ADC-M60 Operating Instructions Manual

PRECAUTIONS
Do NOT install the unit in a location where it
may be subjected to:
— Direct sunlight or other sources of excessive
heat
— Fluid, rain or moisture
— Excessive dirt or dust
— Excessive vibration
This unit is designed to be operated on a 12-voit
DC negative-ground electrical system only.
Choose the mounting location carefully so that
the unit will not interfere with normal driving
functions.
Before making connections, disconnect the ~
terminal of the car battery to avoid short
circuiting.
Notes on CDs
A defective or soiled disc stored in the disc
magazine can cause the sound to drop out
during play.
Always handle a disc by holding its inner and
outer edges.
Do NOT touch the surface of the unlabeled side
of the disc.
Do NOT attach paper or tape etc. to a disc.
Do NOT expose the discs to direct sunlight or
excessive heat.
Clean the discs before inserting them into the
disc magazine. Always clean a disc from the
center outward with a cleaning cloth.
/.
\\
There may be burrs left on the inner and outer
edges of a brand-new disc. The burr may
cause the malfunction of the unit or sound drop-
out. To prevent these problems, if the burr is
left on the disc, be sure to remove them with a
ball-point pen, etc. as illustrated.
&
Ball-point pen
f
Burr
Burr
%
@
Ball-point pan
NEVER usesolventssuch as benzineoralcohol
to clean a disc.
You cannot play an 8-cm (3-inch) CD — even
with the specially designed adaptor.
Do NOT use irregular shape CDs (example:
heart-shaped, octagonal ones).
It
may result in malfunction.
Notes on the disc magazine
Do NOT leave the disc magazine in a place
subject to excessive temperature or humidity.
Do NOT insert more than one disc per slot.
Do NOT drop the disc magazine.
ENGLISH
2