1. Insert the glue cartridge into the rear of the heating duct 2. To heat the device we recommend connecting the power line with the charging station and inserting the plug into the outlet. Allow the hot glue gun to heat approx. 3 to 4 minutes – the control indicator on the handle will illuminate.
It is imperative that the glue gun is allowed to cool down completely on the relevant stand before it is packed away. Do not touch the nozzle or the hot glue. To avoid the risk of burns do not touch the jet or hot glue.
+++ www.kompernass.com +++ www.kompernass.com +++ Figure The hot glue gun is designed to be used for handicrafts. Glued surfaces can be painted. You can dismantle a glued connection by applying heat. Apply the glue in a wavy pattern on flexible materials such as textiles.
Page 7
Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty.
Page 8
ORFGEN Marketing & Communication Essen · Germany www.kompernass.com...