Selection; Rf Signal Level/Deviation; Battery Condition; Display - Sennheiser EM 203 Instructions For Use Manual

MANIPULATION
Choose option "DEV", "RF" or "BAT" to
indicate the RF signal level, deviation or

battery condition.

Depress key
to allow selection.
Depress key
to select the parameters to be indicated.
FOR FURTHER INFORMATION ON DATA INDICATED PLEASE REFER TO THE FOLLOWING PAGES!
After you have selected the data to be
indicated,
depress
and subsequently
or depress
or
to stop storage.
EM 203, Publ. 10/94 engl

Selection

RF signal level/deviation/batery condition
FUNCTION
It is useful to have permanent settings to
facilitate day-to-day applications. The LED
bargraph displays on the EM 1046 RX
receiver module can be set to four different
SET
modes:
Y
DEVIATION/FIELD STRENGTH OF THE ACTIVE CHANNEL
N
FIELD STRENGTH OF CHANNELS A AND B (DIVERSITY)
COMPARISON BETWEEN DEVIATION OF CHANNEL A
AND B (DIVERSITY)
TRANSMITTER BATTERY CONDITION/FIELD STRENGTH
SET
The new setting is stored.
Y
Y = YES !
The display changes to „Menu".
N
N = NO !
The program returns to the original setting, e. g.
New data can be selected, if need be. The
ESC
program returns to the menu. The display
shows:
DIVERSITY
MENU
A B
Y
N
SET
ESC

DISPLAY

4.1.4
(RX)
24