The Extended Menu "Advanced Menu - Sennheiser EM 2000 Instruction Manual

Adjustment tips and functions
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Factory Reset
IP-Address
Software Revision
Exit
Setting a receiving
frequency for the
current channel
Selecting a frequency
bank and a channel and
assigning this channel
a receiving frequency
26
The extended menu
Setting the receiving frequencies and the frequency banks "U1" to "U6"
When you have selected one of the system banks and then select the "Tune" menu,
the receiver automatically switches to channel 1 of the frequency bank "U1". In this
case, "U1.1" briefly appears on the display panel.
Upon delivery, the channels of the frequency banks "U1" to "U6" are not assigned a
receiving frequency.
Via the "Tune" menu item, you can:
1. set a receiving frequency to be stored in the current channel of the frequency bank ("U1"
to "U6")
2. or select a frequency bank ("U1" to "U6") and a channel and assign this channel a
receiving frequency.
Turn the jog dial until the "Tune" menu item appears.
Briefly press the jog dial.
The frequency selection appears.
PEAK Advanced Menu
40 0
Exit
-10
30
Tune
-20
20
-30
Sync Settings
10
-40
543.200 MHz
RF AF
Call up "Tune"
It is vital to observe the notes on frequency selection on page 31.
Set the desired frequency.
Press the jog dial.
Your settings are stored. The "Tune" menu item appears.
Turn the jog dial until the "Tune" menu item appears.
Keep the jog dial pressed until the frequency bank selection appears.
PEAK Advanced Menu
40 0
Exit
-10
30
Tune
-20
20
-30
Sync Settings
10
-40
543.200 MHz
RF AF
Call up "Tune" (special
function)
"Advanced Menu"
PEAK Tune
40 0
-10
30
543.200MHz
-20
20
-30
10
-40
B.Ch: U1. 1
RF AF
Select the MHz value
and confirm
„Stored"
PEAK Tune
40 0
-10
543.200 MHz
30
-20
20
-30
10
-40
B.Ch: U1. 1
RF AF
Select the frequency
bank and confirm
"Stored"
PEAK Tune
40 0
-10
30
548.200 MHz
-20
20
-30
10
-40
B.Ch: U1. 1
RF AF
Select the kHz value;
store the setting
PEAK Tune
40 0
-10
30 543.200 MHz
-20
20
-30
10
-40
B.Ch: U2. 1
RF AF
Select the channel; store
the setting