Sony Bravia KDL-32EX340 Operating Instructions Manual page 67

Condition
Blurry picture / Poor color • Transporting the TV from a cold to a warm location or a sudden
No sound / Noisy sound
No sound but good
picture
Audio noise
No audio or low audio
with Home Theater
System
No color / Irregular
picture
BRAVIA Sync
Cannot find connected
BRAVIA Sync HDMI
device
Second A/V receiver is
not listed on the Device
List
Explanation/Solution
change in room temperature may cause moisture condensation,
resulting in a blurry picture or poor color. Turn off your TV and
wait a few hours before powering on again.
• Check the volume control.
• Press MUTING or VOL + so that "Muting" disappears from the
screen (see page 25).
• Set Speakers to TV Speakers in the Sound settings (see page
41). If it is set to Audio System, sound is not output from the TV's
speakers regardless of the TV's volume control.
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not provide an audio
signal.
• When tuned to a digital channel with Alternate Audio, the
broadcaster may not be broadcasting your preferred Alternate
Audio language. Press OPTIONS, highlight and select Alternate
Audio, and change the Alternate Audio language (see page
41).
• Make sure that the antenna is connected using a 75-ohm coaxial
cable (not supplied).
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged
antenna cable.
• Set Speakers to Audio System in the Sound settings (see page
41).
• Set Audio Out to Fixed in the Sound settings (see page 41).
• Verify that the Video/Component Selection (see page 50) is set
to the current input type in use. We suggest leaving this setting to
Auto.
• Make sure that the Control for HDMI is set up on both the TV
and the optional device compatible with BRAVIA Sync (see
page 28).
• Only one A/V receiver may be used with the BRAVIA Sync and
Control for HDMI functions at one time (see page 51).
(Continued) 67