Table of Contents
Advertisement
5. If the tension is not correct, replace the belt.
Problem
The product does not start.
The battery does not charge.
The battery stops to charge.
Unusual noises from the battery.
The warning indicator on the product
flashes.
The warning indicator for the battery
flashes.
The product does not start and un-
usual noises come from the motor.
The product has no traction.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
18
Troubleshooting
Cause
The battery is not installed correctly.
Low battery voltage.
The battery is damaged.
The battery charger is not connected
to a mains outlet.
The battery charger connector is not
connected to the battery.
The temperature of the battery is too
high.
–
The battery or the electronics are too
hot.
The START/STOP button is in the
START position when you set the
ON/OFF button to the ON position.
The battery is too hot or too cold.
The tension in the belt is too high.
The operation temperature is too low. Operate the product in the correct
The tension in the belt is too low.
The belt is damaged.
Transportation, storage and disposal
Be careful during
6. Install the belt cover and the 4 bolts. Tighten the
bolts to 10 Nm.
Solution
Install the battery correctly. Make
sure that there is no loose battery
connector cable on the product.
Charge the battery
Replace the battery.
Connect the battery charger to a
mains outlet.
Connect the battery charger connec-
tor to the battery.
Make sure that there is no distance
between the air intake of the battery
charger and the air intake/air outlet of
the battery.
Speak to an approved service agent.
Let the product and the batteries be-
come cool.
Set the START/STOP button to the
STOP position and then to the
START position again.
Let the product become cool or move
the product indoors and let it become
warm.
Do a check of the tension in the belt.
operation temperature.
Increase the tension in the belt.
Replace the belt.
WARNING:
the product before transportation. Refer to
To install and remove the batteries on page
17 .
The transport wheels let you move the product manually
for shorter distances. For longer distances, use lifting
equipment to lift the product or put the product on a
vehicle.
Remove the batteries from
1948 - 003 - 13.02.2024
Advertisement
Table of Contents
