Table of Contents
Advertisement
■ Inserting a microSD card
Refer to page 23 for the usable microSD cards.
1.
Turn OFF the receiver.
2.
Pull down the [microSD] slot cover on the side panel.
3.
With the terminals facing the front, insert the card into the slot until it locks in place
and makes a 'click' sound.
L When removing, push in the microSD card until a 'click' sounds. The card is unlocked,
and you can pull it out.
CAUTION:
• DO NOT touch the terminals.
• DO NOT remove the card from the receiver while the card is being accessed.
Otherwise, the card data may be corrupted or deleted.
4.
Completely close the [microSD] slot cover.
[microSD] slot cover
microSD card
Terminals
facing the front
■ Turning ON the receiver
z Hold down [
] for 1 second to turn ON the receiver.
• After the opening message and the remaining battery
capacity are displayed, the receiving frequency is
displayed.
z Hold down [
] for 1 second again to turn OFF the
receiver.
■ Adjusting the audio level
z Rotate [VOL] to adjust the audio level.
L The display shows the audio level while adjusting.
PREPARATION
CAUTION: DO NOT
forcibly or inversely insert
the card. It will damage
the card or the slot.
[microSD] slot
[
]
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
[VOL]
18
3
Advertisement
Table of Contents
