Table of Contents
Advertisement
48 OPERATION
Remote Start
This feature starts preheating and maintains the
temperature for up to 12 hours (including
preheating time). The appliance must be
connected to a home Wi-Fi network to use Remote
Start. Once Remote Start is selected on the
appliance, you can start or stop it remotely using
the LG ThinQ smartphone app. Follow the
instructions in the Smart Functions section to
connect the appliance to the network.
Setting Remote Start
1
Open the oven door to make sure the oven is
ready for pre-heating. Close the oven door.
2
Turn the oven mode knob to select Remote
Start.
3
When ON appears in the display, the Remote
Start function is ready to use.
4
Follow the instructions in the smartphone app
to set the cook mode, temperature, and run
time (preheating time plus holding time).
NOTE
• Remote Start may not start if
- The appliance is not connected to the Wi-Fi
network and/or OFF appears in the display.
- Remote Start is not set up in the smartphone
app.
- The oven door is open. If the oven door is
open, a short beep sounds.
Meat Probe
The meat probe accurately measures the internal
temperature of meat, poultry and casseroles. It
should not be used during broiling, self clean,
warming, proofing, Frozen Meal or Air Sous-Vide.
Always unplug and remove the meat probe from
the oven when removing food. Before using, insert
the probe into the center of the thickest part of the
meat or into the inner thigh or breast of poultry,
away from fat or bones. Place food in the oven and
connect the meat probe to the jack. Keep the
probe as far away from heat sources as possible.
1
Insert the meat probe into the meat.
2
Connect the meat probe to the jack.
3
The meat probe icon flashes in the display if
the meat probe is properly connected.
Setting the Meat Probe Function
(example for roast at 375 °F with probe
temp. 160 °F)
1
Select cook mode. Turn the oven mode knob
to select Conv. Roast.
2
Set the oven temperature: touch 3, 7 and 5
until 375 °F appears in the display.
3
Press Start.
4
Set the probe temperature: touch 1, 6 and 0
until 160 °F appears in the display.
5
Press Start.
NOTE
• The default probe temperature is 150 °F (65 °C),
but can be changed to any temperature between
80 °F (27 °C) and 210 °F (100 °C). The display
shows the changing probe temperature. When
the set probe temperature is reached, the oven
shuts off automatically.
Changing the Probe Temperature
1
Press Temp.
2
Set the oven temperature.
Advertisement
Table of Contents
