Network Topology; Hardware Connection - TP-Link EAP615GP-Wall Installation Manual

Note: Images may differ from your actual product�

Network Topology

A typical network topology for the GPON AP is shown below�
Omada Cloud
SIP Server

Hardware Connection

Connect the hardware based on the provided accessories�
Note: Accessories and operations may vary by model� For
details, refer to the product manual�
1� Remove the anti-dust plug, and connect your optical fiber to
the AP's GPON Port� Route excess fiber behind the device�
2� Connect your telephone to the AP's FXS port� If you don't
need telephone service, skip this step�
3� Connect the AP to power�
• If the AP has a Power port, connect the AP to your power
socket with the power adapter�
• If the AP has an AC Power Input port, connect the AP to
your AC power cable with cord end terminals�
Warning: The product can only be installed by skilled
person!
Gateway
Switch OLT
Controller
Optical Splitter
1
English
AP
AP Clients
AP Telephone