Connect To The Internet; Enable Communication Hardware - HP Compaq Business Series Getting Started

Connect to the Internet

To connect the notebook to the Internet, you must enable your
communication hardware and have an account with an Internet
service provider (ISP).

Enable Communication Hardware

Your modem is enabled when the modem cable is connected to
the notebook and to an analog telephone line.
■
If you connected the modem cable during hardware setup,
your modem is enabled. Proceed to the following section,
"Set Up Internet Service."
■
If you did not connect the modem cable during hardware
setup:
1. Turn off your notebook.
2. Follow the instructions in the section
Modem"
3. Turn on your notebook and log on to Windows.
4. Refer to the following section,
To enable a wireless device, refer to the printed Go Wireless
document included with your notebook (select models only).
For more information about modem, wireless, cable, DSL and
network connections, select Start > Help and Support. The
Help and Support utility provides hardware and software
information, instructions, tutorials, and wizards that can help you
set up or troubleshoot a variety of connections.
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
in Chapter 1.
"Step 3: Connect the
"Set Up Internet Service."
Next Steps
3–9