Menu Item Details - Sony ILCE-7SM3 Manual

Interchangeable lens digital camera

Hide thumbs Also See for ILCE-7SM3:

FTP Help Guide

Interchangeable Lens Digital Camera

ILCE-7SM3

α7SIII Ver.3 or later

Connecting to a network via a wireless LAN

Configure the settings to connect the camera to a network via a wireless LAN. For details about the available functions

and settings of your access point, see the access point operating instructions or contact the administrator of the access

point.

Select MENU →

access point.

The camera will search for connectable access points. If connectable access points are not found, use [WPS

Push] or [Access Point Set.] to configure the settings.

Menu item details

WPS Push:

If your access point has a Wi-Fi Protected Setup™ (WPS) button, press the button to register the access point to the

camera.

Access Point Set. :

You can manually register the SSID name, security system, and password of the access point to the camera.

Display Wi-Fi Info.:

Displays information for the camera such as the MAC address, IP address, etc.

Hint

For details on each menu item, see the "Help Guide" for the camera.

To display the QR Code for the MAC address

You can import the MAC address of this camera to a smartphone. Use one of the following methods to display the QR Code on

the screen, and read the QR Code using the Transfer & Tagging smartphone application.

When the camera is turned off, turn the camera on while pressing the

Press the

(Delete) button on the [Display Wi-Fi Info.] screen.

For details on how to read the QR Code using the Transfer & Tagging, refer to the following support page.

https://support.d-imaging.sony.co.jp/app/transfer/l/macaddress/index.php

The Transfer & Tagging is only available in certain countries and regions.

(Network) → [Wi-Fi] → [Wi-Fi Connect] → [On] to connect the camera to the Wi-Fi

(Playback) button.

TP1001367433

Table of Contents