Table of Contents
Advertisement
Chapter 03
Connecting and Using a Source Device
Read below before connecting the product.
1
Before connecting the product, check the shapes of both ports of the supplied signal cables and the
shapes and locations of the ports on the product and external device.
2
Before connecting the product, make sure you remove the power cords from both the product and
the external device to prevent damage to the product due to a short circuit or over current.
3
After all signal cables have been properly connected, connect the power cords back to the product
and the external device.
4
After connecting is completed, make sure you read the manuals to acquaint yourself with the
product functions, precautions and other information required to use the product properly.
5
To use Max specifications of our products, check the support specifications of the cable version you
use.
― Connecting parts may differ in different products.
― Provided ports may vary depending on the product.
Ports
― The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality. Refer to the
actual product.
Port
Description
Connect to an audio output device such as headphones or earphones.
HDMI IN
Connects to a source device using an HDMI cable or HDMI-DVI cable.
DP IN
Connects to a PC using a DP cable.
SERVICE
Use a USB memory to perform software upgrade.
DC 19V
Connects to the AC/DC adapter.
HDMI IN
DP IN
SERVICE
DC 19V
14
Advertisement
Table of Contents
