Table of Contents
Advertisement
Setting the time
When power is supplied, 88:88 and then 12:00 is automatically displayed on the
display.
Please set the current time. The time can be displayed in either the 24-hour or 12-
hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
1
3
2
5
4
User_MS32DG4504ATTC_DE68-04755K-00_EN.indd 11
User_MS32DG4504ATTC_DE68-04755K-00_EN.indd 11
1. To display the time in the...
24-hour notation
12-hour notation
Press the OK/Clock button once or twice.
2. Turn the Dial Knob to set the hour.
3. Press the OK/Clock button.
4. Turn the Dial Knob to set the minute.
5. When the right time is displayed, press
the OK/Clock button to start the clock.
The time is displayed whenever you are
not using the microwave oven.
Cooking/Reheating
The following procedure explains how to cook or reheat food.
CAUTION
ALWAYS check your cooking settings before leaving the oven unattended.
Open the door. Place the food in the centre of the turntable. Close the door. Never
switch the microwave oven on when it is empty.
1
2
3
4
1. Press the Microwave button.
2. Select the appropriate power level by
pressing the Microwave button again
until the corresponding wattage is
displayed. Refer to the power level table.
3. Set the cooking time by turning the
Dial Knob.
The cooking time is displayed.
4. Press the Start/+30s button.
The oven light comes on and the
turntable starts rotating. Cooking starts
and when it has finished.
• The oven beep and flash End 4 times.
The oven will then beep one time per
minute.
English 11
2/7/2024 3:27:30 PM
2/7/2024 3:27:30 PM
Advertisement
Table of Contents
