Table of Contents
Advertisement
Time code
ENGL
The VITC is recorded in the vertical blanking period of the video signals so that even without using the normal audio
CH2 track, it is used to record the information regarding position on the tape and user's bit information.
Cee
-|____-__ LTC time code (audio CH2)
Audio CH1
Video signal and Hi-Fi audio
VITC time code
The time code itself is indicated on the display and superimposed on the TV monitor.
LTCR
00:07:04:24
|
|
Timecode mode
Hours
Minutes
Seconds
Frames
User's bit
Among the time code signals, the "user's bit" is an information released to the user. It is used to record the operator
number or real time.
LUBR
ABCDEF
88
A total of 16 characters—numbers 0 to 9, A, B, C, D, E and F—can be used for the user's bit.
(The characters "B" and "D" are displayed in small letters in the counter display.)
aE47=
Advertisement
Table of Contents
