Cleaning And Maintenance; Cleaning The Appliance; Cleaning The Burners; Cleaning The Burner Grates - Bosch NGM8059UC Use And Care Manual

Hide thumbs Also See for NGM8059UC:
Table of Contents

Advertisement

Available languages

Available languages

Dish
Burner
Dual-
flame
1
Cook without lid
9 Cleaning and maintenance

Cleaning and maintenance

To keep your appliance working efficiently for a long time,
Cleaning and maintenance
it is important to clean and maintain it carefully.
9.1 Cleaning the appliance
CAUTION
All igniters spark when any single burner is turned on.
Do not touch any of the burners when the cooktop is in
use.
WARNING
Do not clean the cooktop while it is in operation.
NOTICE:
Humidity might enter the appliance interior, if you remove
the control knobs during cleaning. This may damage the
appliance.
Do not remove the control knobs when cleaning the
appliance.
Let the appliance cool down.
1.
Clean with a sponge, water and soap.
2.
Dry with a soft cloth.
3.
9.4 Cleaning recommendations
Follow these cleaning recommendations for the individual parts of your appliance.
Part / Material
Suitable cleaning method
Burner base /
¡ Non-abrasive cleaner: Dish soap and hot
aluminum alloy
¡ Mild abrasive cleaners: Bon Ami®
Rinse and dry immediately.
1
These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home
Appliances Corporation or its affiliated companies.
Total time
Step 1
in min.
Cooking
method
40 - 45
water
Scrub®
1
Step 1
Step 1
Step 2
Heat
Time in
Cooking
setting
min.
method
9
40 - 45
9.2 Cleaning the burners
Clean the surfaces of the burners after every use to
prevent them from becoming encrusted.
NOTICE:
Do not clean the burner parts in the dishwasher. They may
be damaged.
Wait until the appliance has cooled.
1.
Scrub with a non-metallic brush and soapy water.
2.
Dry the burners completely. If there are water droplets
3.
or damp patches on the cooktop when you start
cooking, the enamel may be damaged.
Reassemble the burner parts. Ensure that the burner
4.
caps are correctly positioned on the burner bases.
→  "Burner cap and burner base placement", Page 11
9.3 Cleaning the burner grates
Wait until the appliance has cooled.
1.
Carefully lift off the burner grates.
2.
Scrub with a non-metallic brush and soapy water.
3.
Carefully clean around the rubber feet. If the rubber feet
come off, the grates may scratch the cooktop surface.
Dry the burners grates completely. If there are water
4.
droplets or damp patches on the cooktop when you
start cooking, the enamel may be damaged.
Place the burner grates in their proper position.
5.
→  "Burner grates", Page 12
Important notes
¡ Do not scratch or gouge the port openings.
¡ Clean ports with a wire or a straightened
1
or Soft
paper clip.
¡ Do not use a toothpick, it may break off.
¡ Do not soak burner bases.
¡ A toothbrush can be used for stubborn
stains.
Cleaning and maintenance en-us
Step 2
Step 2
Heat
Time in
setting
min.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

800 seriesNgm8049ucNgm8659uc

Table of Contents