End Of Programme; Homewhiz Feature And Remote Control Function - Beko WTIK94121F User Manual

If you turn the programme selection
knob when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but if it is not possible
to open the loading door since the
water level in the machine is above
the loading door baseline, then turn
the Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.14 End of Programme

End symbol appears on the display when
the programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press On/Off button.
6.15 HomeWhiz Feature and Remote
Control Function
You can check your washing machine from
smart devices and get information about
the status of your machine thanks to the
HomeWhiz function. You can carry out
many operations on your machine from
your smart device by using the HomeWhiz
application. Moreover, you can use certain
properties only with the HomeWhiz Func-
tion.
You must download the HomeWhiz applica-
tion from the app store of your smart
device to use the Wifi feature of your ma-
chine.
To use the app, make sure your smart
device is connected to the internet.
If you are using the app for the first time,
complete user account registration by fol-
lowing the directions on the app. You can
use all HomeWhiz featured products in
your home through this account after regis-
tration is complete.
The , Bluetooth of your smart device should
be on and your device should be connected
to the internet during setup. Your smart
device should be close to the washing ma-
chine. After the setup, the Bluetooth can be
turned off or your smart device does not
need to be close to the washing machine.
You may use your product provided that
your smart device is connected to internet.
You can tap the "Devices" tab in the applic-
ation to view appliances paired with your
account. You may perform the user pairing
operation of these products on this page.
After the app is setup, with the HomeWhiz
Function, your washing machine can give
you instant status notifications via your
smart device.
Your washing machine will send you noti-
fications over HomeWhiz application in the
following cases:
• At the end of the programme,
• When the door of the washing machine is
opened,
• In case of water cut warning,
• In case of security warning,
To utilize the HomeWhiz feature,
ensure that the HomeWhiz app is
installed on your smart device and
that your washing machine is con-
nected to your home Wi-Fi network.
When your washing machine is not
connected to the network, it oper-
ates like a machine without Home-
Whiz function.
Your product shall run with a con-
nection to the wireless network in
your home network. The controls
made by means of the application
will be enabled through this net-
work. Therefore, the wireless signal
strength near the machine's loca-
tion must be adequate.
Operates at HomeWhiz 2.4 GHz fre-
quency band.
Please visit
to learn which Android and IOS ver-
sions are supported by HomeWhiz
application.
EN / 34
link
www.homewhiz.com