Pairing the Magic Lighting Remote
You must pair the Magic Lighting Remote with the projector to use it.
Pair the Magic Lighting Remote prior to use as follows.
1
Put batteries into the Magic Lighting Remote and turn the projector on.
2
Point the Magic Lighting Remote at your projector and press the
(OK) on the remote control.
•
If the projector fails to register the Magic Lighting Remote, try again after
turning the projector off and back on.
Re-registering the Magic Lighting Remote
If the Magic Lighting Remote's pointer does not appear on the projector, you must
re-register it.
1
Hold the remote control towards the projector and press the
buttons at the same time for more than 5 seconds until instructions appear.
2
The previously registered remote control is deregistered and then registered
again.
Unregistering Magic Lighting Remote
If you have multiple LG Smart Projectors and want to register the Magic Lighting
Remote currently in use to another Projector, you must unregister the previous one.
1
If you press the
than 5 seconds, the lamp on Magic Lighting Remote will blink and the
registration will be canceled.
2
If you want to unregister and register for another LG Smart projector, please
follow the registration method above.
button and the
button at the same time for more
19
Wheel
and