Smeg FD33R Instructions For Use Manual page 3

Table of Contents

Advertisement

Always consider instructions stated in sections Positioning and
Energy Saving Tips, otherwise the energy consumption is
substantially higher.
Important
If you have bought this appliance to replace an old one equipped
with a lock that cannot be opened from inside (lock, bolt), make sure
that the lock is broken. This will make it impossible for children to
lock themselves inside the appliance and suffocate.
The appliance must be correctly connected to the mains supply. (see:
Connecting to the Mains Supply).
Do not touch the cooled surfaces while the appliance operates,
especially not with wet hands, because the skin may stick to the cold
surfaces.
Do not freeze bottles containing liquid, especially not soft drinks, such
as mineral water, sparkling wine, beer, cola etc., because liquid
expands during freezing and the glass bottle is very likely to blow up.
Do not eat frozen food (bread, fruit, vegetables), because you can get
frostbites.
If the food has strange smell or color, throw it away, because it is
very likely that it is spoiled and therefore dangerous to eat.
Disconnect the appliance from the power supply before repairing it
(only a qualified technician should repair it), before cleaning and
before replacing the light bulb.
Use only enclosed tools or tools recommended by the manufacturer.
For the sake of environment protection - be careful not to damage
the rear wall of the appliance (the condenser unit or the tubes - for
example when moving the appliance) or any part of the refrigerating
system inside the appliance. Do not use sharp object for defrosting
the appliance. Use only enclosed tools or tools recommended by the
manufacturer.
The refrigerating system of the appliance is filled with refrigerant and
oil, so when the appliance is damaged, handle it with care and
dispose it of in compliance with environmental protecting
precautions. (See We Care for the Environment).
Heating element incorporated in the appliance, all around the rim, is
controlled by the operation of the compressor and it prevents the
door gasket to freeze on to the freezer housing.
In the supply cord is damaged, it must be replaced by the
manufacturer or his service agent or a qualified person in order to
avoid hazard.
The rating plate is inside the appliance or outside on the rear wall.
Instructions for Use
65

Advertisement

Table of Contents
loading

Table of Contents