Table of Contents
Advertisement
BFS
Rink ai a
RP RA
Ea
Shee ents dae a
eet
tt
Before you begin...
* Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
* Insert cassette with record tab (page 15).
* Set POWER to CAMERA.
* Securely position and aim Camcorder.
1
(PV-L650 shown)
Motion Security may mistakenly start
when:
* background is plain, like a white wall, or
has distinct vertical, horizontal, or slanted
stripes, like a venetian blind.
* brightness suddenly changes.
Motion Security may not start when:
* motion is very slow or fast.
* moving object is very small.
* motion occurs only in 1 corner of viewing
area.
* in poor lighting (in this case, MOTION
SECURITY flashes).
* background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
Note:
* Security recording starts if Camcorder is
bumped or repositioned.
* This feature is not available during normal
recording.
* While in Security stand-by, the
Press MENU for MENU
mode.
Press UP A or DOWN ¥ to select
ISECURITY §
} OFF
VIDEO
EFFECTS
; FADE
BLACK
SELECT:
PUSH Wis KEY
END
: PUSH MENU KEY
Press DISPLAY to select ON.
Press MENU to exit. (If cassette is
not inserted, "[gg]" will flash.)
. MOTION
MOTION
SECURITY
SECURITY
STAND-BY
* Recording will start about 3 seconds
after motion is detected.
« Date and time are recorded if
displayed in EVF or LCD monitor
(page 21).
* Recording stops about 30 seconds
after motion ceases.
To cancel Security Mode, set POWER to
following functions are not available: Record/
Pause, Stand-by mode, Digital E.1.S., Video
Effects (Auto/Digital Fade).
42
OFF.
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
