Controls And Indicators - Kenwood GE-76 Service Manual

CONTROLS AND INDICATORS
KENWOOD stereo cqapnic EQuauizen Ge-76 | a ee eee ees eee
a IE TS POET [TUE BORER, PETER TTEMG
| (mania! fy aPC)
ne SS Se
@ POWER switch
Press the power switch to turn ON the power. To
turn the power off, press the switch again to set it
to the out position.
The above applies also when operating the second deck.
Level control (Right R /Left L channel)
Adjust these controls up and down to equalize the
sound by +10 dB or +5 dB with the center fre-
quency indicated. The right and left channels can
be equalized separately.
EFFECT MODE switch
6)
©
@eee
6 @ 8
EQUALIZER switch
Turn this switch to ON and the frequency
characteristic will be modified by passing through
the graphic equalizer. The equalizer control in-
dicators will light. In the OFF position, the frequen-
cy characteristic remains unchanged.
Input selector switches
Using these switches press to ON, select the input
program source to be equalized.
LINE — To equalize the program source con-
nected to the LINE IN jacks.
TAPE — To equalize the program source con-
nected to the TAPE PLAY jacks.
EQ. REC switch
Press this switch and EQUALIZER switch to ON
signals will allow equalized to be recorded on tape.
lf you wish to record non-equalized signals with the
equalizer switch in the ON position, turn the
equalizer recording switch to OFF. This will allow
you to hear the equalized signals while recording
non-equalized signals.
Equalizer recording indicator (EQUALIZER REC)
Lights when the EQUALIZER REC switch is set to
on.
Equalizer indicator (EQUALIZER ON)
Lights when the EQUALIZER switch is set to on.
TAPE INPUT indicator
Lights when the TAPE switch is set to on.
LINE INPUT indicator
Lights when the LINE switch is set to on.
Spectrum analyzer indicator ( R_ right)
Displays of the right channel output level at the
LINE OUT jacks according to frequency range.
Spectrum analyzer indicator ( L left)
Displays of the left channe! output leve! at the LINE
OUT jacks according to frequency range.