Specifications - Panasonic ES365 Operating Instructions Manual

Wet/dry rechargeable shaver
Hide thumbs Also See for ES365:
Table of Contents

Advertisement

Available languages

Available languages

2. Remove the two screws {a) on
the top.
3. Remove the two screws (b) and
remove the bottom cover (c).
4. Push the chassis (d) out of the
housing.
5. Remove the battery (e) from the
chassis.
Dry the shaver completely before
setting it in the charging adaptor.
Keep the charging adaptor away
from water and handle it only with
dry hands. Do not use an extension
cord to connect the charging adap-
tor to an outlet.
Store the charging adaptor in a dry
area where it will be protected from
damage.
The outer foil is very thin. If handled
improperly, it can be easily dam-
aged. To avoid personal injury, do
not use the shaver if it has a dam-
aged foil or inner blade.
Wash the shaver in tap water. Do
not use salt water, detergent or boil-
ing water. Do not submerge the
shaver for a long time.
Do not wipe it with thinner, benzine
or alcohol. Clean it by cloth with
soapy water.
Do not take the housing apart as
this can affect the watertight con-
struction.
Caution
Do not charge the shaver where the
temperature is below 0 °C(32 °F) or
above 40 °C (104 °F}, where it will
be exposed to direct sunlight or a
heat source, or where there is a lot
of moisture.
Use only the included shaver charg-
ing adaptor RE3-64 to charge the
ES365 shaver.
Specifications
Power source:
100-120V AC, 50-60 Hz
Motor voltage: 1.2V DC
Charging time: 8 Hour
Househoid Use
READ ALL INSTRUCTIONS
BEFORE USE.
FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A TOLL-FREE
NATIONAL ACCESSORY PURCHASE HOT LINE AT 1-800-338-0552.

Advertisement

Table of Contents
loading

Table of Contents