Washing Programs - Smeg EL03 Instruction Manual

User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard
Reference program
Load
Type of detergent
Amount of detergent
Rinse aid setting
3.2

Washing programs

Before starting a washing program make sure that:
The water supply tap is open.
•
The correct amount of detergent has been added to the dispenser .
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without obstruction.
•
The dishwasher door is securely closed .
•
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6 place settings and allows saving of water and
electricity. It is controlled by the HALF LOAD button (4) (see section "3. Description of the
controls") and allows washing in the upper basket only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next
wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket , while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.
CANCELLING THE CURRENT PROGRAM
To cancel the program in progress the dishwasher must be switched off by pressing the ON/OFF
key (3) (see section "3. Description of the controls").
Turn the program selector to SOAK and wait for the dishwasher to start. On completion of the
program, switch off the dishwasher by pressing the ON/OFF key (3).
Selector on 3 + ECO 55°C button
12 place-settings
Depending on the model 3/4 or 4/6
EN 50242
EN 50242
B
30 g
33