Option Selection; Flexi Tabs - Smeg DWAU149XO Instruction Manual

User instructions
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph "
S
TARTING THE PROGRAM
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.

OPTION SELECTION

Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
•
It is not possible to select any options when the soak
program is being used.
•
All options except "Flexi Tabs" are disabled at the end of the
wash cycle. To disable the "Flexi Tabs" option, press the
relative button (the light goes out).
•
All options, including "Flexi Tabs" are disabled when a
program is CANCELLED after it has begun.

Flexi Tabs

Ideal for multi-function detergents, this option allows washing to be
optimised, with full benefits from the combined-action tablets. When this
option is activated, any salt and rinse aid in the relative containers will
not be used.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
N.B.:
When the salt and rinse aid containers are empty, the relative lights will
remain on even if the "Flexi Tabs" option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
". The program will resume from the
15