Table of Contents
Advertisement
Adjusting the front and rear
suspension
This model is equipped with an elec-
tronically adjustable suspension sys-
tem. The preload of the rear shock
absorber and the damping forces of
both the front fork and rear shock ab-
sorber can be adjusted.
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
Preload
When riding with luggage or a passen-
ger, use the preload adjusting function
to adjust the suspension system to
match the load. There are 4 preload
settings.
TIP
The preload adjusting function will
appear only when the engine is
running.
Changing the preload setting will
also adjust the front and rear sus-
pension damping forces accord-
ingly. See "Damping force" on
page 4-40 for more information.
About cold temperature opera-
tion:
• When using the preload adjust-
ing function, there should be no
weight on the vehicle.
• When using the preload adjust-
ing function at ambient temper-
atures near or below 0 °C (32
°F), to protect the preload ad-
Instrument and control functions
EAU55424
EWA12423
To adjust the preload
1. Function display
2. Preload adjusting function
3. Preload setting pictogram
4-38
justing function motor, the elec-
tronically adjustable suspension
system warning light may come
on.
• The suspension will still operate
as normal, only the preload ad-
justing function cannot be used.
• To reset the electronically ad-
justable
suspension
warning light, wait approximate-
ly 6 minutes and then turn the
key to "OFF" or immediately
turn the key to "OFF" and then
wait 6 minutes.
• If the electronically adjustable
suspension
light
remains
Yamaha dealer check the sus-
pension system.
1. Turn the key to "ON", start the en-
gine, and then shift the transmis-
sion into neutral.
2. Push the menu switch "MENU" to
switch the function display to the
preload adjusting function.
GEAR
N
system
system
warning
on,
have
a
1
2
3
4
Advertisement
Table of Contents
Troubleshooting
