Description Of The Controls; Upper Panel; Program Selection Button; Water Hardness Adjustment On Indicator Light - Smeg DWAFI152T Instruction Manual

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2 Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3 By pressing this button in sequence it is possible to select the
desired program.

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in "water hardness
adjustment" mode.
4
SALT WARNIN LIGHT (on some models only)
If the symbol is present, illumination of this light denotes a
regenerating salt warning level.
RINSE AID WARNING LIGHT (on some models only)
5
Illumination of this light signals that rinse aid dispenser is empty.
QUICK TIME + EXTRA OPTION BUTTON
(see "EXTRA OPTIONS" section)
6
The button controls selection of the quick time programs.
(see table).
QUICK TIME PROGRAM LIGHT
7 Illuminates to indicate that one of the extra programs (see table) is
going to be executed.
9