Table of Contents
Advertisement
Quick Links
User Manual
S49C95*U
(Singapore only: S49C950UAE)
(Saudi Arabia only: S49C950UAM)
The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
Advertisement
Table of Contents
Related Manuals for Samsung S49C950UAE
Summary of Contents for Samsung S49C950UAE
- Page 1 The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners.
-
Page 2: Table Of Contents
Table of contents Before Using the Product Connecting and Using a Source Device Menu Safety Precautions Read below before connecting the product. Picture Electricity and Safety Ports Eye Care Installation Operation Connecting and Using a PC PIP/PBP Connection Using the HDMI Cable Cleaning OnScreen Display Connection Using an HDMI-DVI Cable... - Page 3 Table of contents Troubleshooting Guide Appendix Requirements Before Contacting Samsung Responsibility for the Pay Service (Cost to Customer Service Centre Customers) Product diagnosis (Screen issue) Not a product defect Checking the Resolution and Frequency A Product damage caused by customer's fault Check the following.
-
Page 4: Before Using The Product
DC voltage: Rated voltage marked • Only use the power cord provided with your product by Samsung. Do not use the power cord with literature concerning operation and with this symbol is DC voltage. other products. -
Page 5: Installation
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Centre if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result. -
Page 6: Operation
‒ Be sure to power off the product and disconnect the power cord when water or other foreign Warning substances have entered the product. Then contact Samsung Customer Service Centre. • There is a high voltage inside the product. Never disassemble, repair or modify the product •... -
Page 7: Cleaning
― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product • Disconnect the power cord from the power socket if you do not plan on using the product for an (Service fee will be charged.) -
Page 8: Correct Posture To Use The Product
Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. •... -
Page 9: Preparations
Chapter 02 Preparations Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― Disassembly is the reverse order of assembly. ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Check the direction of the arrow on the stand base. - Page 10 Push the assembled stand into the main body in the direction of the arrow as Attach the COVER-REAR TOP to the rear of the monitor, as shown in the figure. shown in the figure. Stand up the monitor as shown in the figure. Separate the box from the product.
-
Page 11: Precautions For Moving The Product
Precautions for moving the product Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. -
Page 12: Adjusting The Product Tilt And Height
Adjusting the Product Tilt and Height Caution ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -15.0° (±3.0°) ~ 15.0° (±3.0°) -2.0° (± 2.0°) ~ 11.0° (± 2.0°) 120.0 mm (±5.0 mm) •... -
Page 13: Wall Mount Kit Specifications (Vesa)
Hold the bezel at both side edges and adjust the monitor angle until the screen becomes level. (Be • Samsung shall not be held liable for any product damage or personal injury caused by using a wall- careful not to directly hold the LCD display.) mount kit other than the one specified or from an attempt to install the wall-mount kit on your •... -
Page 14: Control Panel
Control Panel Parts Description 5-Way Button Multi directional button that helps navigate. This LED is power status indicator. ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without ― You can select the power LED operation to be enabled or disabled on Power LED notice to improve quality. -
Page 15: Direct Key Guide
Direct Key Guide ― On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. Eye Saver Mode Volume Switch USB Source Features Eye Saver Mode Off ―... -
Page 16: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. Before connecting the product, make sure you remove the power cords from both the product and the external device to prevent damage to the product due to a short circuit or over current. -
Page 17: Ports
Ports Port Description Connects to a source device using an HDMI cable or HDMI-DVI cable. ― The functions available may vary depending on the product model. The colour and shape of parts may Connects to a PC using a DP cable. differ from what is shown. -
Page 18: Connecting And Using A Pc
Connecting and Using a PC Connection Using an DP Cable Select a connection method suitable for your PC. Connection Using the HDMI Cable ― It is recommended to use the DP cable provided as an accessory. If not provided, be sure to use a DP cable of 1.5 m or below. -
Page 19: Connecting To Headphones Or Earphones
Connecting to headphones or earphones Connecting the Product to a PC as a USB HUB ― Use headphones or earphones when activating sound with an HDMI-HDMI or DP cable. ― The headphones or earphones jack supports only the 3 conductor tip-ring-sleeve (TRS) type. Connecting the Power Use the product as a hub to connect the PC to a variety of devices or networks. -
Page 20: Tidying Up The Cables
Tidying Up the Cables Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. -
Page 21: Menu
Chapter 04 Menu Function Key Guide → ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Picture Description Picture Mode... - Page 22 Description Picture Mode mode When the external input is connected through HDMI/DP/USB Type-C and PC/AV Mode is set to AV, Picture Mode has eleven automatic picture settings (Dynamic, Standard, Eco, Movie, Game Standard, FPS, RTS, RPG, Sports, Original and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Eco, Movie, Game Standard, FPS, RTS, RPG, Sports,...
- Page 23 Description Brightness You can adjust the general brightness of the picture. (Range: 0~50) A higher value will make the picture appear brighter. ― This menu is not available when Eye Saver Mode is enabled. Contrast Adjust the contrast between the objects and background. (Range: 0~50) A higher value will increase the contrast to make the object appear clearer.
- Page 24 Description Color Tone Select a colour tone that best suits your viewing needs. ― This menu is not available when Eye Saver Mode is enabled. ― This menu is not available when PIP/PBP Mode is enabled. White Balance Adjust the colour temperature of the picture so that white objects appear brighter. ―...
- Page 25 Description ― This menu is not available when Color Space Eye Saver Mode is enabled. ― This menu is not available when PIP/PBP Mode is enabled. Color Space Configure colour space settings to refine the spectrum of colours on your screen. Color Gamut Choose a colour gamut.
- Page 26 Description Dynamic Brightness Automatically adjust the Brightness to provide the best possible screen contrast under the current conditions. ― This menu is not available when Eye Saver Mode is enabled. ― This menu is not available when PIP/PBP Mode is enabled. ―...
- Page 27 Description Screen Ratio Choose the size and aspect ratio of the picture displayed on screen. ― This menu is not available when PIP/PBP Mode is enabled. mode • Auto Wide mode • 16:9 21:9 32:9 Screen Fit ― The function may not be supported depending on the ports provided with the product. ―...
-
Page 28: Eye Care
Eye Care Description Adaptive Picture Optimises brightness and provides the best picture quality in real time, based on the lighting condition and the content you're viewing. Minimum Brightness Set the minimum brightness for the monitor screen. This function only works if its value is lower than the value set in the Picture menu's Backlight... - Page 29 Description Sound Source Set which screen you want to hear the sound for. In PIP mode • In PBP mode • Switch USB Switch the USB source while in the PIP/PBP mode. Screen Ratio Choose the size and aspect ratio of the picture displayed on screen. mode •...
-
Page 30: Onscreen Display
OnScreen Display Description Transparency Set the transparency for the menu windows. Position • H-Position: Move the menu position to the left or right. • V-Position: Move the menu position up or down. Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. Display Time Set how long the menu window will remain on screen for when it is not in use. - Page 31 Description Off Timer Plus Off Timer • Timer: Turn on Off Timer mode. • Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.
- Page 32 Description Input Port Ver. Select an HDMI version. ― The supportable device and resolution may differ depending on its version. ― When the version is changed, the screen may blink. ― If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol. ―...
- Page 33 Description Accessibility Configures the accessibility options. • SeeColors Mode: Allows users with colour blindness to experience rich colours. Enable this feature to customise colours to suit your viewing conditions, to experience richer colours on the screen. ― Some menus are not available when SeeColors Mode is in use.
-
Page 34: Support
Software Update Update software using an update file on a USB device. Save the update file (in .bin or .img format) that you downloaded from the Samsung website (http://www.samsung.com/sec) to a USB storage device. Connect the USB device to the port on the monitor. -
Page 35: Installing The Software
Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website. (http://www.samsung.com) ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. -
Page 36: Troubleshooting Guide
Check the following. Customer Service Centre Caution ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. When the product makes popping (cracking) sound. The sound may be caused by contraction or expansion from temperature change of external Product diagnosis (Screen issue) components or internal circuit of the product. - Page 37 Screen issue The screen is too bright. The screen is too dark. Adjust Brightness and Contrast. The power LED is off. The screen will not turn on. Screen colour is inconsistent. Check that the power cord is connected properly. Change the Color settings.
- Page 38 Sound issue There is no sound. Re-check the condition of the connected headphone or earphone or adjust the volume. Check the volume. Check whether the volume of the product or the source device is set to mute. The volume is too low. Adjust the volume.
-
Page 39: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •... -
Page 40: Specifications
• The specifications are subject to change without notice to improve quality. Maximum Pixel Clock 972.67 MHz • For detailed device specifications, visit the Samsung website. Power Supply AC100-240V~ 50/60Hz • Open Source Licence Notice Refer to the label at the back of the product as the standard voltage Open Source used in this product can be found on the following webpage (https://opensource. -
Page 41: Standard Signal Mode Table
Standard Signal Mode Table Model Name S49C95*U Synchronization Horizontal Frequency 30 ~ 184 kHz Vertical Frequency 30 ~ 120 Hz Resolution Optimum Resolution 3840 x 1080 @ 60 Hz (HDMI 1.4, DP 1.1) Maximum Resolution 5120 x 1440 @ 60 Hz (HDMI 2.0, USB Type-C, DP1.2) 5120 x 1440 @ 120 Hz (DP1.4) If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. - Page 42 Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) HDMI IN DP IN Type-C IN VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500...
-
Page 43: Appendix
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...