Table of Contents
Advertisement
Installation
Please install the refrigerator properly and safely to save electricity
bills and suppress noise.
Unpacking
Remove the packing box, foam base and all fixing tapes.
Proper installing location
Do not locate the refrigerator exposing to direct sunlight and hot air which can
suppress the decline in cooling capacity and electricity bill saving. The refrigerator
should be placed at a dry, well ventilated location which can inhibit mold and save
electricity bills.
Put the refrigerator at a firm level
Rotate the adjusting foot and fix it. (Prevent vibration and noise). When placing the
refrigerator on carpets and PVC floor, place a strong wooden board under the
refrigerator. (To avoid discoloration due to heat)
Leave the space for heat dissipation
The refrigerator will spread heat to surrounding during food cooling process. Leave
at least 4 cm from the left and right and 10 cm from the upper and lower part as
shown in the figure. (It requires more space if it produces vibration and noise)
The block on the back side is to prevent the refrigerator from
getting too close to the wall and affecting heat dissipation.
Above 10cm
At least 4 cm
from the left
and right
Specific socket,
(AC 230V, 60Hz)
More than 10 cm
on the back
Advertisement
Table of Contents
