EJ
Using a PC
EJ
Setting Audio Input
Audio Select HDMI
This function sets the terminal to output the computer
audio.
The adjustment items vary depending on the input
source.
Select the
input source corresponding to the terminal connected to the PC and
then adjust the desired
item.
To perform the
operation,
refer to "Devices"> "Video
in"
>
"HDMI3"
>
"Audio
Select".
HDMI3
HDMI(Digital):
Select this when the TV and PC are connected using an
HDMI-certified cable and audio is input via the same
cable.
HDMI•Analog: Select this when the TV and PC are connected using a
HDMI-certified cable and the audio is input via a 0 3.5 mm stereo
minijack.
• When "Audio Select" is set to
"HDMI•Analog",
sound will not be
produced if you use only an HDMI-certified cable to connect HDMI-
compatible equipment. To produce
sound,
you should make an
analog audio
connection.
• If you want to connect HDMI-compatible equipment using only an
HDMI-certified
cable,
set "Audio Select" to
"HDMI(Digital)".
• "Audio Select" can only be set for the HDMIIN 3.
ENG 8-1
ENGLISH
I
FRAN<;AIS
I
ESPANOL