Smeg CR322ANF Instructions For Use Manual page 10

Refrigerator temperature Refrigerator temperature
setting setting
(control panel I) (control panel I)
Start of fan assisted Start of fan assisted
cooling cooling
(control panel I) (control panel I)
Fast freezing function
10
• Temperature of the appliance is set by turning the button (B) to
the position between the Min and Max span.
• Recommended setting of the thermostat knob is to ECO
position.
• If the room temperature, in which the appliance is installed, is
lower than 16°C, the recommended setting of the thermostat
knob is to the Max.
• In case of exceptionally higher ambient temperatures it is
recommended to switch the fan operation at high speed by
pressing button (D) – only for models featuring control panel I.
• SF/SC position
- SF position stands for "Super frost" and indicates fast
freezing (certain models only).
- SC position stands for "Super cool" and indicates fast
cooling (certain models only).
• In apliances with digital display the indicator fl ashes during the
setting procedure, and the beep signals each change of preset
temperature. When fl ashing stops the fi nal setting is stored in
memory.
• When the appliance is switched on, the display (A) will fl ash for
a few seconds – the set value will be indicated. After a while,
the actual or maximum value is indicated. This value will remain
on the display until the actual temperature in the refrigerator
compartment falls below the displayed level.
Fan assisted fast cooling is started by pressing the button (D).
Orange LED is on. Fan eliminates minor temperature differences
between different cabinet spaces, and reduces dew formation on
the interior surface of the appliance.
The fan operates only at closed refrigerator door.
Fast freezing function is activated by turning the button (B) arrow
(triangle) to the position SF/SC.
If the function is not switched off manually it stops automatically
(after approximately two days of operation).
• After the automatic stop of the fast freeze function the appliance
switches to regular operation mode at Max. setting, so you need
to turn the button (B) back to your preferred setting.
• The fast freeze function is used after the fi rst start of the
appliance, before major cleaning, or when large quantity of
fresh food is stored in the freezer.