Port And Port Led - Supermicro AOC-A200G-B1CM User Manual

2.4 Port and Port LED

QSFP56 Port
The QSFP56 adapter port is located on the AIOM Form factor card. Connect a Direct
Attach Copper cable or an LC Fiber-Optic cable to the port to provide 200 Gigabit Ethernet
communication. Refer to the AIOM Form factor card layout on page 2-2 for the location of
the QSFP56 port.
QSFP56 Port LED
There are two LEDs located below the single QSFP56 port to indicate the link speed and
activity of each port. See the table at right for more information.
QSFP56 Port LEDs
LED Color
Activity Blinking Green
Link Amber
Green
17
Chapter 2: Hardware Components
Definition
Activity
< 200 Gbps Link Speed
200 Gbps Link Speed