SECTION 3
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
3-1. COVER AND ARM ASSEMBLY
© Six claws
© Two screws
(Tapping (B)(1.4x3))
© Remove the cover in the
direction of arrow ®.
iA
© Am assembly
© Stop ring (E type)
@ Open the backle assembly in
the direction of arrow ®.
3-2. CASSETTE HOLDER ASSEMBLY
Note:
Pull around the wire assembly through the
seven claws as shown in the figure for
installation.
@ Remove the wire assembly in
the direction of arrow.
© Tapping screw
Four claws
© Cassette holder
assembly
© Tapping
screw
Fev
Three claws