Table of Contents
Advertisement
Important Information
1. The following Connecting Cable is available from
the McIntosh Parts Department: Power Control
Cable Part No. 170202 Six foot, 2 conductor
shielded, with two 1/8 inch stereo mini phone plugs.
2. The PS2K's Power Control Input will function
within a 5 to 20 DC Voltage range. The Power
Control Output will only send a signal if a source is
connected to the Power Control Input.
3. To avoid damage, do not connect the speaker level
output terminals from any receiver, amplifier or
integrated amplifier to the inputs of the PS2K
Powered Subwoofer.
4. The PS2K needs to be connected to a dedicated
circuit with AC outlet. The type and size of the
dedicated AC circuit with outlet needs to be in
accordance with the local electrical wiring codes.
Always contact your McIntosh dealer and certified
electrician for additional information and assistance.
Note: 20 Amp, 120 volt AC circuit for use in the United States and
Canada only.
Packing and Unpacking the PS2K
Warning: The PS2K is very heavy. Please refer to
Unpacking instructions located in a envelope
attached to the shipping crate. Be sure to have the
appropriate manpower available to handle safely.
The PS2K is finished in a highly polished but durable
paint. However, it can be scratched, so please ensure
all sharp objects like rings, belt buckles, watches,
etc are removed prior to handling. Also please note
the PS2K has no protective covers or grilles over the
woofers. So please ensure not to reach and grab the
product woofers.
Once removed and placed in your listening area, the
protective film may be removed by slowly peeling
off, all around the speaker. Also remove the protec-
tive rubber ring on the metal base.
Packing the PS2K is the reverse of unpacking, so
please be sure to save all instructions and materials.
P S 2 K
3
Advertisement
Table of Contents
