Safety Information - TP-Link Festa FS308G Regulatory Compliance And Safety Information Manual

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам
нормативних документів та вимогам, що передбачені чинними законодавчими актами
України.

Safety Information

■ Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
■ Keep the device away from water, fire, humidity or hot environments.
■ Place the device with its bottom surface downward.
For switch powered by power adapter:
■ Do not use damaged charger or USB cable to charge the device.
■ Do not use any other chargers than those recommended.
■ Adapter shall be installed near the equipment and shall be easily accessible.
■ Use only power supplies which are provided by manufacturer and in the original packing of
this product. If you have any questions, please don't hesitate to contact us.
For switch powered by power cord:
■ Plug the product into the wall outlets with earthing connection through the power supply
cord.
■ The plug on the power supply cord is used as the disconnect device, the socket-outlet shall
be easily accessible.
■ The socket-outlet shall be installed near the equipment and shall be easily accessible.
For switch powered by USB or standard PoE:
■ This equipment can be powered only by equipments that comply with Power Source Class 2
(PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply.
Symbols may vary from products.
Symbol
Explanation
Class II equipment