Table of Contents
Advertisement
en powerMove Plus
Depending on the size of the cookware and the
covered cooking surface, you can switch on the flexible
cooking zone as two separate cooking zones or as one
connected cooking zone:
powerMove Plus
10 powerMove Plus
You can use this function to change the power level for
an item of cookware by simply moving it within the
FlexZone. For this, the zone is divided into three areas
with different power levels.
10.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡ Front section = power level 9.0
¡ Middle section = power level 5.0
¡ Rear section = power level
You can change the standard setting for the default
power levels. You can find out how to do this in the
"Basic settings" section → Page 21.
Time-setting options
11 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
¡ countUp function
12
.
9.2 Activating flexInduction Plus
Place the cookware on the cooking zone in such a
1.
way that it is also on the extended FlexZone.
Select the cooking zone and the power level. The
2.
area of the extended FlexZone is shown on the dis-
play.
a The function is switched on.
Note: If the extended FlexZone is not shown on the dis-
play, lift the pan and place it on the cooking zone.
9.3 Deactivating flexInduction Plus
Select the cooking zone and set it to to 0.
▶
a The function is switched off.
10.2 Activating powerMove Plus
Requirement: Only place one item of cookware on a
FlexZone.
Select one of the two cooking zones in the
1.
FlexZone.
Touch the active cooking mode.
2.
Select
3.
a The function is switched on.
Note: You can change the power levels of the zones
during cooking.
10.3 Deactivating powerMove Plus
Select a cooking zone.
1.
Touch the active cooking mode and switch to a dif-
2.
ferent cooking mode.
a The function is switched off.
Advertisement
Table of Contents
