* For replacement,
you willneed a 5.91Inches-long
Phillips screwdriver anda pair ofgloves.
Unplug TV, then use a
screwdriver to remove the
screw.
Remove the Lamp cover.
.... '
Remove the screws securing
the Lamp by using a
screwdriver.
Separate the Lamp from the
engine by holding the handle
and pulling it out.
' ......To reinstall the Lamp, follow
these steps in reverse order.
•
Be sure the replacement Lamp is the same type.
•
After replacing the lamp, align the lamp cover with the groove and secure the screw.
•
The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
English -