Rear Panel - Sony Trinitron PVM-2054QM Operating Instructions Manual

Rear panel
R/R-Y GIY
OUT IN OUT O@
B/B-Y
RGB/CO! PONENT
EXTISYNC
AC IN socket
Connect the supplied AC power cord to this socket and
to a wall outlet.
[2] LINE A, LINE B connectors
Two groups (A and B) of line input connectors for the
composite video and audio signals and their loop-
through output connectors.
To monitor the input signal fed through these
connectors, keep the LINE/RGB selector in the LINE
position (light off) and press the A/RGB or
B/COMPONENT selector (light on) on the front panel.
VIDEO IN (BNC)
Connect to the video output of a video equipment, such
as a VCR ora color video camera. For a loop-through
connection, connect to the video output of another
monitor.
VIDEO OUT (BNC)
Loop-through output of the VIDEO IN connector.
Connect to the video input for a VCR or another
monitor.
When the cable is connected to this connector, the
75-ohms termination of the input is automatically
released, and the signal input to the VIDEO IN
connector is output from this connector.
(The AA,- mark indicates automatic termination.)
AUDIO IN (phono jack)
Connect to the audio output of a VCR or toa
microphone via a suitable microphone amplifier. For a
loop-through connection, connect to the audio output of
another monitor.
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN jack. Connect to
the audio input of a VCR or another monitor.
LINE C connectors
Y/C IN (4pin mini DIN)
Connect to the Y/C separate output of a video camera,
VCR or other video equipment.
Y/C OUT (4pin mini DIN)
Loop-through output of the Y/C IN connector. Connect
to the Y/C separate input of a VCR or another monitor.
When the cable is connected to this connector, the
75-ohms termination of the input is automatically
released, and the signal input to the Y/C IN connector is
output from this connector.
AUDIO IN (phono jack)
Connect to the audio output of a VCR or a microphone
(through a suitable microphone amplifier).
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another monitor.