Preparations; Rear Connections - Philips DC570 User Manual

Preparations

Rear connections

The type plate is located at the rear of the
system.
Power
A
●
Before connecting the power cord to the wall
outlet, ensure that all other connections have
been made.
WARNING!
– For optimal performance, use only the
original power cord.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
10
FM wire
FM wire antenna
antenna
Antenna Connection
B
Connect the supplied FM antenna to the FM
terminal. Extend and position the FM antenna for
optimal reception.
Note:
– Position the FM antenna away from the speaker
wires to avoid electrical interference.
Optional connections
C
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.