Table of Contents
Advertisement
Print after creating print data by page
The print data is created in page units, and printing starts after the processing of one page of print
data is complete.
If a printed document contains unintended results such as streaks, selecting this check box may
improve the results.
Important
• Uncheck this check box under normal circumstances.
Cancel the safety margin regulation for paper size
Cancels the safety margin regulation when you set Media Type to Premium Fine Art Rough on the
Main tab.
When you check this item, the safety margin regulation is canceled, printing in a wider print area and
borderless full-page printing become possible, and printing can be performed for all paper sizes.
Important
• When the safety margin regulation is canceled, the paper may become smudged or the print
quality may drop depending on the paper size used and the environment.
If that happens, we recommend that you print on a paper size that has large margins.
Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application software and then print
the data.
Depending on the application software being used, the image data may be cut off or may not be
printed properly. In such cases, select On. If you will not be using this function, select Off.
Important
• When using this function, the print quality may drop depending on the print data.
Unit of Print Data Processing
Selects the processing unit of the print data to be sent to the printer.
Select Recommended under normal circumstances.
Important
• A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
Print With
Specify the ink tank to be used from the installed ink tanks.
Select from All Colors (Default), All Except PGBK (Black), Only PGBK (Black).
Important
• When the following settings are specified, Only PGBK (Black) does not function because the
printer uses an ink tank other than PGBK (Black) to print documents.
Other than Plain Paper, Envelope, Ink Jet Hagaki (A), Hagaki K (A), Hagaki (A), or
Hagaki is selected for Media Type on the Main tab
Borderless is selected from the Page Layout list on the Page Setup tab
• Do not detach the ink tank that is not in use. Printing cannot be performed while either ink tank is
detached.
296
Advertisement
Table of Contents
